Metal Roofing Systems 2018-02-07T21:25:00+00:00

Metal Roofing Systems

Metal Roofing Systems corrugated metal roofingStatewide Roofing installs quality Metal Roofing products and systems. Metal roofs are attractive and come in a broad spectrum of colors and designs. Metal roofs are low maintenance, long lasting, resist decay, discoloration, and mildew. Metal roofs have excellent performance in wind resistant, water, snow, and ice shedding. In some cases, Metal Roofing is hail resistant and an energy efficient option.

Standing Seam

All fasteners on standing seam panels are installed underneath the system and are not exposed to the elements. There are many different profiles that can be utilized in this system.

  • Snap Lock – Product is designed to snap together locking panels in place.
  • Seamed – Seams are mechanically folded together using a  seaming machine.
  • Batten – Folded strips that are installed over the top of each standing seam.
  • Panel Systems.
  • “R” and “M” panels are exposed fastener corrugated panels which are used for metal roof, wall, soffit, fascia, mansard,  liner or equipment screens. Each features 36″ wide coverage and may be applied over open framing.

Retrofit Systems

Installing Metal Roofing retrofit system provides you with  the following benefits:

  • Energy efficiency
  • Decades long service life
  • An aesthetically pleasing appearance
  • An easy integration with solar panels
  • Reduced maintenance
  • Lower life-cycle cost
  • Stone Coated Steel

As the original stone coated steel roofing system, the  DECRA® product line represents a perfect blending of over 50 years of research and practical experience. Offering the ultimate in performance and engineering design is what DECRA Roofing Systems are all about. Stone Coated Steel products are unique. Stone coated and pressed into different profiles, DECRA products offer texture and style not found in traditional metal roofing products.

Statewide Roofing the Metal Roofing Experts

As a substrate, steel provides the perfect medium for pressing panels to resemble various conventional materials: asphalt shingles,  clay tiles, concrete tiles, and wood shakes. However, unlike conventional products, stone coated steel is lightweight, durable, freeze/thaw resistant,  allows for walking, and requires little to no maintenance over the life of the roof.

Metal Roofing panel roof system description

Metal Roofing Systems after 5There is only one category of Metal Roofing systems used in low-slope applications — structural metal panel.   Structural metal panel roof systems can be used for low slope roofs because of their hydrostatic, or water barrier, characteristics. It is important to note structural metal panel roof systems can be used for steep slope roof assemblies also. Most structural metal panel roof systems are designed to resist the passage of water at laps and other joints, as the sealant or anti capillary designs can be used at the seams. Structural metal panel roof systems possess strength characteristics that allow them to span supporting members.

Roof deck

Structural metal panel roof systems are installed over a large variety of substrates. There are two general categories of substrates:   one is continuous or closely spaced decking that provides solid support for the metal roof panel, and the other is composed of spaced structural supports (such as purlins) where the metal panels must span between supports. Most structural metal panels are used over spaced structural supports without being supported by a solid roof deck.

Underlayment

Underlayment (or “felt paper” as it is frequently called) is installed over the roof deck before the application of a metal panel roof system. An underlayment performs two primary functions: it provides temporary weather protection until the metal panel roof is installed, and it provides a secondary weatherproofing barrier if moisture infiltrates the metal roof panels. Underlayments typically are not used with structural metal panel roof systems when intermittent supports are used to carry the roof systems.

Vapor retarders, insulation, and ventilation

Condensation should be expected to develop on the undersides of metal roof panels. Careful consideration should be paid to vapor retarder, insulation and ventilation issues. Because every building is in some way unique, building owners and designers may need to consult moisture-control specialists.

Call Statewide Roofing for all your Metal Roofing needs.